Showing 1–16 of 234 results
Gedore 1751379 Spring Compressor, Diameter 80mm – GD KL-0015 Self-locking of the mobile holder / lifting carriage Can also be used for conical springs Plastic protective inserts (optional). Features: Suitable for suspension strut axles, including spring holder size 1N and 2N for spring Diameter of 80 (inside) – 195 (outside) mm Self-locking of the mobile…
Gedore 1752294 Narrow Caliper Piston Resetting Tool, Length 260mm – GD KL-0111-1 For floating saddles with single pistons or for fixed calipers with two pistons. This tool allows quick and clean resetting of brake pistons on caliper systems without damaging the sleeve or piston, No tilting of the piston when resetting, Low effort due to…
Gedore 1752421 Brake Spring Assembly Hook, Length 155mm – GD KL-0114-21 Designed to remove and replace return springs on drum brake systems. Features: For unhooking and re-hooking retaining springs on brake drum systems Specifications: Suitability: Universal Length: 155mm Weight: 0.22 lbs Country of Origin: Taiwan
Gedore 1752510 Set of 4 Hose Clamps, 10 – 45mm – GD KL-0121-20 Used to clamp/close hoses during repairs. For fuel, brake and water lines with Diameter of from 10 to 45mm. For fuel, brake and water lines with Diameter of from 10 to 45mm. Features: For closing hoses For flexible hoses with a diameter…
Gedore 1752529 Hose Clip Plier with Ratchet Locking Mechanism, Straight, Length 273mm – GD KL-0121-22 Designed for the replacement of fuel line, oil line, radiator and water hoses which are not retained by “Jubilee Type” clips, but by reusable, self-tensioning hose clips. Special design of the pliers allows hose clips to be securely and safely…
Gedore 1752537 Hose Clip Plier with Ratchet Locking Mechanism, 110 deg Angle – GD KL-0121-23 Designed for the replacement of fuel line, oil line, radiator and water hoses which are not retained by “Jubilee Type” clips, but by reusable, self-tensioning hose clips. Special design of the pliers allows hose clips to be securely and safely…
Gedore 1752669 Hose Clip Plier, Length 240mm – GD KL-0121-90 For the tightening of ear clamps (Oetiker System) on axle boots, radiator and fuel hoses. Pros: No damage to the ear clamps, No damage to hoses, Due to the special design of the pliers, the clamping head of the clamp is simultaneously flattened during clamping….
Gedore 1752685 Hose Clamp Plier, Length 175mm – GD KL-0121-94 Used to open and close the reusable hose clips, types CLIC and CLIC-R (Caillau/Serflex). Features: Suitable for CLIC and CLIC-R clamps (caillau/Serflex) For opening and closing the reusable hose clamps For CLIC clamps Suitable for Audi, Citroen, Fiat, Mercedes, Opel, Peugeot, Renault, VW etc. Specifications:…
Gedore 1752731 Oil Filter Socket, 74mm (waf), 14 Flats – GD KL-0122-301 For a safe and quick oil filter replacement. Intended for use on oil filters with Size (waf) 74mm and 14 Flats. Features: Suitable for oil filters with SW 74 and 14 surfaces For a quick and safe oil filter replacement Suitable for Audi,…
Gedore 1752901 Valve Lapper Tool, Diameter 16mm, 21mm – GD KL-0125-70 Used for hand lapping valves. The tool is equipped with two suction cups in different sizes designed to hold and rotate the valves for lapping operations. The tool is equipped with two suction cups in different sizes designed to hold and rotate the valves…
Gedore 1752952 Magnetic Lifter, Valve Collet, Flexible, Lifting Force 150mm – GD KL-0126-221 With this flexible mini magnetic lifter, metallic objects can be removed even from the smallest crack. The KL-0126-221 magnetic lifter is particularly suitable for lifting/removing valve collets. The KL-0126-221 magnetic lifter is particularly suitable for lifting/removing valve collets. Features: For particularly small…
Gedore 1753029 Spark Plug Connector Plier, Length 295mm – GD KL-0127-6 Grooves in the jaw prevent the pliers from slipping off. 10 degree angled, long sleeve jaw. Long pliers shanks enable deep-seated spark plug connectors to be pulled off and additionally offer extended safety distance to the hot engine. Grooves in the jaw prevent the…
Gedore 1753053 Dial Gauge, Diameter 40mm – GD KL-0128-0 Spindle and clamping shank made of stainless steel, design and measurement accuracy according to DIN 878-E. The dial gauge is additionally equipped with a 10mm extension (KL-0128-03). The dial gauge is additionally equipped with a 10mm extension (KL-0128-03). Features: Measuring pin and clamping shank made of…
Gedore 1753118 Chain Pipe Cutter, 70mm – GD KL-0131-51 This tool is used to cut exhaust pipes up to a wall thickness of 2.5mm and a Diameter of 70mm. Also suitable for V2A-steel. Thanks to the special design of the tool, only a minimum expenditure of force is required throughout the cutting operation. The wing…
Gedore 1753312 Pin-Type Face Wrench, Diameter 14 – 100mm, Pin Diameter 5mm – GD KL-0149-131 Designed to remove the pre-tension ring when installing a new SAC clutch on Audi, Fiat etc., For counter-holding the pulley when removing and installing the Viscos fan on a lot of VW-Audi engines, Designed to remove the pre-tension ring when…
Gedore 1753568 Ball Joint Extractor, 17mm (waf), Fork Opening 23mm – GD KL-0164-2 Designed to extract the ball joint pivot pin from the steering arm, steering knuckle, stabilizer etc. Required for extracting the suspension ball joint pivot pin from the steering knuckle. Required for extracting the suspension ball joint pivot pin from the steering knuckle….
No products in the cart.